Getting Connected

Adobe Connect makes it possible for people around the world to participate virtually in iDigBio meetings, workshops, webinars, and events!

It takes just a few simple steps to get connected:

Ensure you are ready to connect to your event

Plug in your headset (or your set of headphones/earbuds).

ExpandMore details...
Using a headset will minimize or eliminate feedback or extraneous background noise.
If you prefer to use your computer’s built-in microphone, you must use headphones or earbuds, or you and everyone else in the meeting will experience feedback problems with the audio.

Find a quiet location with a strong internet connection.
Test your computer and internet connection using the Adobe Connect Diagnostic Test.

ExpandMore details...
Install or update your Adobe Flash Player. This may require administrative rights on your machine.
Install the Adobe Connect Add-In.
For a quick introduction to Adobe Connect, watch this 2-minute tutorial: Attending a meeting

Join the Adobe Connect meeting room

Enter the URL provided by your meeting host into your web browser (e.g., Chrome, Firefox, Safari)
Select Enter as a Guest
Type your First and Last Name in the box provided
Click Enter Room

ExpandMore details...
If you want to get familiar with Adobe Connect, you can practice using this meeting room: http://idigbio.adobeconnect.com/test
Select Enter as a Guest, type your First and Last Name, and click Enter Room.
If your meeting is setup to use an integrated teleconference, you will be prompted to select how you want to connect your audio. To use your computer, select Using Microphone (Computer/Device) and click Join. To connect via telephone, you can have Adobe Connect call your telephone by entering your phone number and clicking Join. Or you can view the information on how to dial-in yourself and then click Done.

Start your Audio

If the host has enabled microphone rights for participants, you can enable your microphone by clicking the microphone icon so that it turns green. If there is a line through the green microphone icon, you are muted.

ExpandMore details...
If the host has enabled microphone rights for participants, you will have a white microphone icon at the top of the screen . To enable your microphone, click the microphone icon so that it turns green . If there is a line through the green microphone icon , you are muted.
If your microphone volume is too loud or too soft, click the arrow next to the microphone icon, choose Adjust Microphone Volume…, move the slider, click OK.
Ensure the speaker icon at the top of the screen is green . If the icon is white , click it to make it turn green. When the icon is white, your speakers are off and you will not be able to hear anything. If your speaker volume is too loud or too soft, click the arrow next to the green speaker icon, choose Adjust Speaker Volume…, move the slider, and click OK.

Start your Video

If the host has enabled webcam rights for participants, you can enable your webcam by clicking the webcam icon so that it turns green. Then, click Start Sharing at the bottom of the video preview.

ExpandMore details...
If the host has enabled webcam rights for participants, you will have a white webcam icon at the top of the screen . To enable your webcam, click the webcam icon so that it turns green . Then click Start Sharing at the bottom of the video preview.

Having trouble?

At any point during your meeting, you can type a message into the Chat window of Adobe Connect.
Try using Chrome as your browser.
You can send an e-mail to help@idigbio.org

Scheduling the Seminar Room

iDigBio provides a "seminar" room in Adobe Connect --> https://idigbio.adobeconnect.com/room/ <-- that can facilitate up to 500 attendees in a workshop, webinar, seminar, meeting or other event. Seminar rooms are scheduled for specific date, time, and duration and do not require a dedicated Meeting Host. Don't let the term "seminar" confuse you - Adobe uses this term "seminar" because the room can hold a large number of people. The following instructions will help you schedule a session in iDigBio's seminar room:

Log into https://idigbio.adobeconnect.com
Click Seminars in the top menu bar.
Click Seminar Sessions in the submenu and do one of the following:
- Click the New Seminar Session button to create a session. Provide the various details of your seminar session, including Name, Start Time, Duration, and Summary.
- Select an existing seminar session and click the Duplicate Seminar Session button. Specify the required details. To search for an existing seminar session, you can narrow down the results displayed using the date filter.
Click the Create button to create and save your seminar session.
The URL for your seminar session will ALWAYS be: https://idigbio.adobeconnect.com/room/
You can create a 60-minute ad-hoc seminar session from inside a seminar room as follows:
- Navigate to https://idigbio.adobeconnect.com/room/
- Click New Instant Session in the notifier pop-up in the upper-right corner.

Doing the Meeting Host Shuffle

There are certain cases where you may need to use an individual meeting room (e.g., ) instead of the seminar room. In these cases, you will need to temporarily Add yourself into the Meeting Host role before the meeting, and then Remove yourself from this role after the meeting.

Before Your Meeting

Log into https://idigbio.adobeconnect.com
Click Administration in the top menu bar.
Click Users and Groups in the submenu.
Select Meeting Hosts from the list and click the Information button.
Click the View Group Members button.
Scroll down the left-hand list of Possible Group Members to find your name (or use the Search button).
Highlight your name, and click the Add button.
Your name will now appear in the Current Group Members, which means you are ready to host your meeting.

After Your Meeting

Log back into https://idigbio.adobeconnect.com
Navigate as above: Administration --> Users and Groups --> Meeting Hosts --> Information --> View Group Members
Highlight your name in the right-hand list of Current Group Members, and click the Remove button.

Meeting Courtesy

Join the meeting early. Give yourself at least 10 minutes to get connected.
If you join after the meeting has started, wait for the host to ask who joined to prevent potential interruption of the speaker.
Limit background noise by making sure you are in a quiet area.
Speak clearly and concisely.
Mute yourself when you are not speaking.
Silence your mobile devices.
Be a good listener – minimize distractions, don’t multitask, etc.
Behave as you would in a face-to-face meeting – be courteous, don’t interrupt, watch your body language, etc.

Having a Good Experience

Follow these guidelines to have a good experience with your Adobe Connect event:

Learn how to operate your system’s microphone, speakers, and camera before connecting.
Always use a headset (or a set of headphones/earbuds) for good audio quality and minimal reverberation.
Use the Audio Setup Wizard from the Meeting menu to set up your sound.

ExpandMore details...

On the Test Sound Output screen, did the sound come out of where you thought it would? If not, check your default playback device. Was the sound too loud or too soft? Adjust your speaker volume.
On the Test Microphone Volume screen, were you too loud or too soft? Adjust your microphone volume.

Optimize your Adobe Flash settings.

ExpandMore details...
In the main Adobe Connect window, right-click and choose Settings…
On the Display tab, ensure that Enable hardware acceleration is checked.
On the Privacy tab, click to Allow Adobe Flash to use your camera and microphone, and click Remember.
On the Local Storage tab, ensure that the slider is all the way to the right (“Unlimited”).
On the Microphone tab, ensure that Reduce Echo is checked.

Minimize the demands on your computer.

ExpandMore details...
Only run what you will need during the meeting (notes, presentations, etc.).
Shut down unnecessary applications running in the background before you join the meeting, particularly web applications (email, chat, VPN, etc.), because these will compete for your computer’s CPU, memory, and internet bandwidth.
In some cases, other applications will already be using the camera or microphone drivers, which will prevent Adobe Connect from using them for the online meeting.

Minimize competition for your internet bandwidth.

ExpandMore details...
Wired internet connections are strongly preferred over wireless connections.
Avoid connecting from places that have slow internet bandwidth, such as coffee shops.
If you are having poor sound quality, try shutting down your camera to reduce demand on your internet bandwidth.

Pre-select your default audio devices.

ExpandMore details...
On a PC: Right-click the speaker icon in the system tray and choose Playback devices. Right-click your headset/headphones and select Set as Default Device. While you’re here, choose the Recording tab. Right-click your headset/microphone and select Set as Default Device.
On a Mac: Click on the System Preferences icon. Click on the Sound icon. Click on Output. Select headphones.

Tips for Meeting Organizers

Be prepared! Setup your room layouts in advance, upload and test your content, etc.
Send event invitations and reminders and include a link to this wiki page to ensure your participants are ready.
Directly connect to the fastest internet connection possible.
Don’t forget to start the recording!
Use End Meeting to close the meeting, which will shut down the room and automatically close any polls, etc.

Need additional help?

The Adobe Connect User Community has a wealth of materials, tutorials, videos, overviews, etc. Some specific items you might want to check out are:

For Participants:

For Organizers:

Web Conferencing

Contents

Getting Connected